SPECIFICATIONS

Battery Included: no

Brand Name: FNIRSI

CC1CC2 Voltage: 0-3.3V

Capacity: 0-9999.99Ah

Certification: CE

D+D- Voltage: 0-3.3V

DIY Supplies: Electrical

Data Record: Yes

Device Temperature: ℃

Display: 1.54-inch TFT LCD

Energy Consumption: 0-9999.99Wh

High-concerned chemical: None

Model Number: FNB-C2

Monitoring Current: 0-6.5A

Monitoring Power: 0-240W

Monitoring Voltage: 4-50V

Operating Temperature: 0-40℃

Origin: Mainland China

Power Source: DC

Power Supply: DC

Recording Time: 9 h 0 m 0 s

Voltage range: Other

FNB-C2 USB-C tester is a high-reliability, high-safety USB voltage and current tester and a fast-charging protocol trigger for mobile devices. It features a 1.54-inch TFT LCD display with 240×240 ultra-high resolution and adopts an external 20-bit high-precision ADC. The PD protocol uses an external physical communication chip for secure and stable operation, with full support for PD3.1. The device can be used to measure the power supply or consumption of USB interfaces, phone chargers, and flash drives; to test smartphone charging performance and monitor the input/output status of power banks; to carry out fast-charging protocol tests and observe charger output ripple; to check whether Type-C cables contain eMarker chips and identify their current-carrying capacity; and to perform PD protocol packet capture and monitoring.

Monitoring Voltage: 4～50V, Resolution: 0.000001V, Accuracy: ±(0.2‰+2)

Monitoring Current: 0～6.5A, Resolution: 0.000001A, Accuracy: ±(0.5‰+2)

Monitoring Power: 0～240W, Resolution: 0.000001W, Accuracy: ±(0.5‰+2)

D+/D− Voltage: 0～3.3V, Resolution: 0.001V, Accuracy: ±(1.0%+2)

CC1/CC2 Voltage: 0～3.3V, Resolution: 0.001V, Accuracy: ±(1.0%+2)

Device Temperature: ℃, Resolution: 1℃, Accuracy: ±(1.2%+3)

Capacity: 0～9999.99Ah, Resolution: 0.00001Ah

Energy Consumption: 0～9999.99Wh, Resolution: 0.00001Wh

Recording Time: 9 h 0 m 0 s, Resolution: 1 s

Auto Protocol Trigger/Detection:

UFCS/PD2.0/PD3.0/QC2.0/QC3.0/FCP/SCP/AFC/VFCP/VOOC/SVOOC1.0/SVOOC2.0/APPLE/BC12/MTK

Single Fast-Charge Protocol Test:

PD2.0, PD3.0, PPS, EPR, QC2.0, QC3.0, AFC, FCP, SCP, VFCP, UFCS, VOOC, SVOOC1.0, SVOOC2.0

E-Marker Chip Detection: Supported (Reading & Identifying)

Waveform Drawing: Low-speed (2sps-1ksps) & High-speed Ripple (20ksps-2Msps)

Data Statistics: 10 sets of capacity/energy/time statistics; 9h curve recording

Gravity Sensor: Supported (4-directional automatic screen rotation)

Protocol Monitoring/Conversion: PD protocol monitoring & QC-to-PD conversion

Cable Simulation Test: Supported

Onboard Temperature: Supported (Real-time monitoring)

VBUS Waveform (Ripple): Supported (Adjustable: 20kHz – 2.0MHz for ripple/stability analysis)

1. FNB-C2 Tester

2. Gift Box

3. User Guide