GODIAG GT100 Diagnostic Adapter Cable — BMW

$264.61 $298.61

Color black green Blue WHITE

Ships FromChina Mainland

SPECIFICATIONS

Name: GODIAG GT100 Diagnostic Adapter Cable — BMW
Brand: GODIAG
SKU: 14:193;200007763:201336100
Price: 264.61 USD
Availability: InStock

Brand Name: GODIAG

Certification: NONE

High-concerned chemical: None

Item NO: HKSO537-C

Origin: Mainland China

Note:in this link,you can one of choose:

1.GODIAG GT100 PLUS GPT+GODIAG for BMW CAS1/CAS2 Mech-Key Test Platform+Godiag CAS2 CAS3 SER Semi Smart Test Platform;

2.GODIAG GT100 PLUS GPT+GODIAG for BMW CAS1/CAS2 Mech-Key Test Platform;

3.GODIAG GT100 PLUS GPT+Godiag CAS2 CAS3 SER Semi Smart Test Platform;

4.GODIAG GT100 PLUS GPT Only.

Before you place an order,please check which combination you wanna to choose.

GODIAG GT100 PLUS GPT ENET DOIP 24V-12V AUTO TOOLS OBD II Break Out Box ECU Connector

Product Function Comparison Among GT100 Plus, GT100+ and GT100

Product Introduction:

GODIAG GT100 PLUS GPT is a testing platform for OBDII protocol communication detection and ECU maintenance / diagnosis / programming / coding. GT100 PLUS has a voltage and current display which is convenient for maintenance engineers to judge the current working status of ECU.

It can convert the car OBD2 interface into 16 pin for signal detection. It can be connected to the single modules or multiple modules of the vehicle. It can also be connected with any diagnostic tool to tell whether the car communication is good or not.

It supports the 24v to 12v voltage conversion, DOIP-ENET communication and GPT to read and write ECU data.

It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, the key remote control fails and the fault light turns on.

The product uses CANH and CANL shielded twisted cables, which can resist electromagnetic interference and make communication more stable.

Product Functions:

1.Use GPT to read and write ECU with devices (such as PCMFLASH, KE-S-SV2)

Support GPT to read and write data without disassembling the ECU.
Supports OBD2 BEN-CH [CAN bus & K-Line]
Supports GPT BOOT CNF1

2. Check OBDII diagnostic interface Communication Status and Display Voltage

By connecting the vehicle and diagnostic tool via OBDII, Godiag GT100 PLUS GPT's LED will indicate whether the OBDII diagnostic interface has a good communication with the car. It monitors the voltage of vehicle's OBDII interface and display it in real time. If it is less than 11V, please stop the diagnosis and programming to avoid data loss/ module locked/ the vehicle being unable to start. It supports OBD2 BEN-CH full protocols.

1. Manufacturer custom

2. SJE1850 wire

3. Manufacturer custom

4. Power grounding

5. Signal grounding

6. SAEJ2284《CAN》high

7. ISO9141-2&iso, DIS4230-4K wire

8. Manufacturer custom

9. Manufacturer custom

10. SJE1850 wire《bus->

11. Manufacturer custom

12. Manufacturer custom

13. Manufacturer custom

14. SAEJ2284《CAN》low

15. ISO9141-2 & ISO/DIS 4230-4L wire

16. Car battery positive

3. Support DOIP-ENET Diagnostics

Support DOIP-ENET communication

Support diagnostic programming and coding for BMW Benz, for Volkswagen, for Audi and other vehicles that support DOIP protocol. [no software is provided.]

Can be used for diagnostic programming and coding of for Land Rover, for VOLVO, and for Geely vehicles that support DOIP communication. [no software is provided.]

4. 24V to 12V Voltage Conversion

Convert the 24v voltage of the diagnostic interface of heavy trucks, light trucks, pickups, etc. into 12v voltage that can be used by diagnostic equipment.

5.) Used to check whether the diagnostic / programming / coding tool can send communication signals.

6.) ECU connection: single module connection

GODIAG GT100 PLUS GPT, connected to a single ECU module, is convenient for a user to do the single-module diagnosis and programming.

7.) GT100 PLUS GPT program key for VW, for Porsche, for Mitsubishi etc with all keys lost - activate the instrument or immobilizer module.

A. To program for VW 4th generation / 5th generation Lost all keys (for example: new A6L Touareg A4 Q5 A7), please use GT100 PLUS GPT to short-circuit banana connector PIN 16----PIN 1 to lit up the dashboard, aft that use the key programmer tool to connect with the female adapter of GT100 PLUS GPT+ for data collection. Some vehicle dashboards won't be lit up, but data can also be collected, for example: A6L Q7.

B. To replace the engine ECU of Toyota or to use some key programmer to program for Toyota when all keys lost, it needs to short-circuit PIN13-PIN4

C. To program for Mitsubishi key with all keys lost or to set OBDII when all remote key lost, please short-circuit PIN1-PIN4.

D. To program for Porsche Cayenne key with all keys lost or with all remote key lost, please short circuit PIN3-PIN7.

8.) GT100 PLUS GPT Pin 1, 9, 3, 11 12, 13, 8 [corresponding to the yellow banana connector on the machine], these non-standard obd2 protocol interface may display CAN BUS or K-Line communication protocol. GT100 PLUS GPT can only display K- Line Pwm Vpw+ KWP 2000 protocol. GT100 PLUS GPT will display CANBUS K-Line Pwm Vpw+ KWP 2000 protocol communication.

9.) Quickly communicate with a single ECU on bench by connecting with the ECU diagnostic / programming tool. [Which allow the engineers or technicians to complete the job on bench, also keep away the risk of data loss in other modules when directly testing on the vehicle.]

10.)Multiple vehicle ECU module connecting. [It’s aimed at solving the problem of engineers and technicians who need to connect multiple ECU during programming a module, such as connecting to multiple ECU modules for key programming]

11.) Replace the auxiliary power supply for the battery - uninterruptible power supply connecting mode. [Since there’s failure or missing antitheft remote control data of some vehicles when the battery is dismantled, the auxiliary power supply aims at supplying power to the vehicle through GT100 PLUS GPT before replacing the battery to sustain the power supply to the vehicle. It guarantees the vehicle ECU is power connected during replacement of the battery.]

12.) The OBD2 cable of GT100 PLUS GPT is as long as 1.4 meters, which will solve the problem that the diagnostic tool cable is not long enough or the vehicle diagnostic port is too narrow to connect. Please connect GT100 PLUS GPT first, turn on the power switch and you will see the voltage on the screen which can tell whether the power supply of the vehicle is normal. [Which keep away the risk of burning out the diagnostic & programming tool due to the modified vehicle OBD2 port]

13.) For old OBD1 vehicles or special diagnostic port, please connect GT100 PLUS GPT through the banana plug and DB25 jumper. The OBD1 diagnostic port or special diagnostic port can be transferred to the standard OBD2 diagnostic port.

14.) GT100 PLUS GPT will convert the OBD1 port of special truck to the standard OBD2 diagnostic port according to the protocol.

15.) Work with CAS1/CAS2 Mech-Key Test Platform(Can choose in this link)

16.) Work with CAS2 CAS3 SER Semi Smart Test Platform(Can choose in this link)

17.) For BMW-CAS4/CAS4+Programming Test Platform, it’s used to test whether the programmed key works with CAS4 normally

18.) For BMW FEM/BDC Programming Test Platform

19.) More connectors and dedicated modules are under development, please wait...

Product Specifications:

Item	Specification
Diagnostic port	OBDII
Working voltage	DC 9V-24V
Work and power	0.5-0.6W
Adapter power	Input AC100v-240v, Output DC12.5V 2.5A
Operating temperature range	-20 to 70 °C ( -4 to 158 °F )
Storage temperature range	-40 to 85 °C ( -40 to 185 °F )
Dimension	L: 23cm, W: 18cm, H: 7cm

Package includes:

1pc x Host
1pc x GPT connecting cable
1pc x Ethernet cable

1pc x OBD 2-in-1 extension cable

1pc x Colored jumper cable

1pc x Power supply 12V

1pc x Resistance 120 ohm

6pcs x Banana plug

24pcs x Wire accessories, Dupont 2.54mm connector female pins
1pc x Manual

GODIAG for BMW CAS1/CAS2 Mech-Key Test Platform

GODIAG for BMW CAS1/CAS2 Mech-Key Test Platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS1 / CAS2 programming engineers. It can cooperate with the key programming devices like Xhorse Key Tool Plus Pad / Xhorse vvdi 2 / for bmw vvdi bim tool / Autel im608 / CGDI for BMW / Lonsdor devices, OBDSTAR devices, etc., to perform all key lost matching or key addition operations. Please note that this product is only suitable for mechanical keys.

Note: GODIAG for BMW CAS1/CAS2 Mech-Key Test Platform does not support semi-intelligent smart key CAS2 and cannot be used with diagnostic equipment or with GT100, GT100+. If necessary, please purchase a semi-intelligent smart key detection platform for the semi-intelligent smart key CAS2.

Product Features:

1. Detect CAS and key synchronization

2. Solder-free matching CAS1/CAS2 mechanical key

3. CAS data reading, writing and programming

4. All keys lost /adding keys matching

5. CAS key data backup

6. CAS module function judgment

GODIAG CAS2 CAS3 SER Semi Smart Test Platform Detect CAS & Key Synchronization Solder-free Matching CAS Data Read, Write and Program

Godiag CAS2 CAS3 SER Semi Smart Test Platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS2 / CAS3,CAS3+ CAS3++ programming engineers. It can cooperate with the key programming devices like Xhorse Key Tool Plus Pad / Xhorse vvdi 2 / for bmw vvdi bim tool / CGDI for BMW / Lonsdor devices, OBDSTAR devices, etc., to perform all key lost matching or key addition operations. This product is suitable for magnetic semi-intelligent or smart keys.

For AUTEL, LONSDOR and OBDSTAR devices, data cannot be read and written through the OBD2 bench method. This is because these devices cannot perform 100kbCANbus independent communication with the for BMW IMMO module.

For AUTEL LONSDOR OBDSTAR devices, you can only use a programmer to read out the CAS2 semi-intelligent CAS3 3+ data, perform key matching, and after successful matching, use GODIAG CAS2 CAS3 SER Semi Smart Test Platform to perform key synchronization detection.

Use GODIAG CAS2 CAS3 SER Semi Smart Test Platform to perform IMMO module and key synchronization detection. After confirming that the key is matched successfully, you can avoid the vehicle being unable to start due to unsuccessful key matching.

Note:
Godiag CAS2 CAS3 SER Semi Smart Test Platform does not support mechanical key CAS2 and cannot be used with diagnostic equipment or with GT100 GT100+.
Can't work on Autel device.

Product Features:

1. Detect CAS and key synchronization
2. Solder-free matching CAS2/CAS3 serial smart key
3. CAS data reading, writing and programming
4. All keys lost /adding keys matching
5. CAS key data backup
6. CAS module function judgment