GODIAG GT115 Diagnostic Adapter Cable
GODIAG GT115 Diagnostic Adapter Cable
SPECIFICATIONS
Brand Name: GODIAG
Certification: CE
High-concerned chemical: None
Number: HKSF382-B
Origin: Mainland China
Product Functions:
In combination with GODIAG GT115(SF414), the vehicle instrument plug can be connected to collect ELV data, and in combination with the GODIAG GT107+ gearbox adapters(SF380-FULL), it can diagnose or read and write data.
In combination with full protocol OBD2 jumper(SF347) or other OBD2 canbus communication protocol cables, and GODIAG GT107+ gearbox adapters(SF380-FULL) to diagnose and read and write data in the office.
1pc x GODIAG MQB Data Collector ELV/TCM DSG Gearbox Adapter
GODIAG GT115 For V-A-G MQB IMMO4 CAN-Bus UDS 4th Generation IMMO System Test Platform with POGO PIN to Read & Write Data
Product Introduction:
MQB models may range from superminis to large family cars, replacing the current generations of models. The MQB architecture replaces the PQ25, PQ35 and PQ46 platforms. Our product is a connecting cable designed for the MQB IMMO system, enabling engineers to conveniently perform off-vehicle operations such as IMMO programming, matching, and diagnostics on the MQB IMMO system. Moreover, it has a POGO PIN to read and write data to the dashboard, which is more stable to hold and does not damage the cable.
Product Functions:
1. Synchronous detection of key and vehicle IMMO module
2. Independent diagnosis of engine and power expansion module.
3. Communication diagnosis and programming test of engine module and power module through gateway module
4. IMMO 4th generation POGO PIN read and write data and key synchronization detection
5. Connect BCM module with gateway module for communication diagnosis and programming test(Note: Press the corresponding switch when required.)
6. Gateway module detection
7. Current connected power supply voltage display
8. Current connected module current display
9. 2032 battery voltage detection.
10. With POGO PIN to read and write data to the dashboard.
GODIAG Full Protocol OBD2 Jumper Used to Connect ECU for ECU Programing
GODIAG Full Protocol OBD2 Jumper Functions:
1. Supports DC power supply
2. Support safety protection banana head super programming dedicated connection port power supply.
3. Independent GND4, GND5 [meet the needs of special ECU programming].
4. With boot GND4 clip, compatible with programming equipment such as MP--P-S, FGT-ECH, KE-SSV2.
5. With GND4 GND5 short-circuit switch [some ECUs need to be switched to short-circuit mode when programming].
Note: The switch of GND4-5 is normally pressed to make it light. When some ECUs need to be independently connected to GND4 and GND5, release the switch.
6. With ignition analog switch [equipped with 1 large and 2 small dedicated ignition cables].
7. Support standard obd2 full protocol connection [double K line, double CAN line], 3 large and 2 small power plugs, 4 large GND, 4 small GND.
8. Equipped with CAN protocol communication resistance.
